Posts in category Hay and Forage Equipment

Round baler PRONAR ASIA Z500

PRONAR ASIA Z500

PRONAR ASIA Z500

 

The ROUND BALER PRONAR Z500 round baler bales cut grass and straw. It is a solid chamber chain baler with pickup header with working width of 1800 mm. Double string binder (accelerates binding process, and thus baling) comes as a standard and also operation from tractor cab, mechanical rear flap interlock, bale ejector enabling commencement of gathering before closure of rear flap and broad tyres 400/60-15.5 TL 14PR 140.A8 (perform well on marshy meadows). String binder is equipped with triple step regulation of binding density, enabling optimal selection of number of bindings, ensuring optimal selection of bindings number, depending on the type and size of harvested material, application of elastomer springs in rear flap bolting system mechanism guarantees high density of bale, which is important, with regard to the final quality of the silage.

Automatic press chain lubrication system guarantees regular lubrication of chains, is a reliable guarantee of long-term trouble-free operation of the press.

Non-fluid oil ensures that all points are lubricated properly.

Audio-visual chamber filling signalling.

ROUND BALER PRONAR ASIA Z500
Header pick up width (m) 1,8
Chamber type solid chamber, chain
Chamber diameter (m) 1,2
Chamber width (m) 1,2
Chamber interlock hydraulic-mechanical
Power requirement (kW/KM) 40/55
String binder double
Binding density regulation triple step mechanical
Engaging binder hydraulically
Operation of chamber and pick up header From control pulpit placed in tractor
Bale counter on control panel
Tyres 400/60-15,5 TL 14PR
Height/Length/Width (mm) 2220 / 3490 / 2460
Weight (kg) 2250

Optional equipment

  • Net binder
  • Audio-visual chamber filling signalling

 

 

Mixer Feeders PRONAR ASIA VMP5S

PRONAR ASIA VMP5S

PRONAR ASIA VMP5S

 

AUGER MIXER WITH 4 CUTTING KNIVES PRONAR ASIA VMP5S
Allowable total weight 3800 kg
Load capacity 2200 kg
Dead weight 1600 kg
Tank capacity 5 mi
The loading surface of tank 7,2 sq.m
The maximum length of the tank 2990 mm
The maximum width of the tank 2190 mm
The tank height 1430 mm
The diameter of the silo floor 1700 mm
Dimensions (length / width / height) 3880/2190/2130 mm
Floor tin thickness / walls of the tank 20/8 mm
The height of the tank floor from the ground 695 mm
The distance between the wheels 1500 mm
Suspension stiff
Applied force on the drawbar loop 800 kg
Tires 14
Structurally permissible maximum speed 25 km/h
Weight System 3 point
Feed distribution systems The unloading front window on the right side of the auger mixer with 4 cutting knives
Number of the auger turns (at the PTO speed 540 RPM) About 25 RPM
Min. tractor capacity requirements 50 / 36.7 hp ./ KW

Basic equipment

  • Chassis frame: rectangular made of closed sections
  • Drawbar: fixed to connect with the bottom tractor hitch
  • Drawbar draft: rotational with a loop diameter of 50 mm
  • Drawbar support: telescopic simple
  • Agitator type : 1 vertical auger
  • 4 knifes of chrome – vanadium – tungsten steel reinforced for abrasion
  • Interchangeable blade knives
  • 2 the opposite cutting knives in the tanker increase the speed of the feed grinding process, mechanically adjustable
  • Unloading front window on the right side
  • Granary tray below unloading windows below for a thorough dosage of the feed.The granary trays do not affect the size of the cattle-feeder
  • Metal hatch under the unloading window
  • Side window rubber in unloading window limits distribution of feed and enables the uniform feed distribution
  • Electronic scales with LCD display for determining the feed weighing time
  • Footboard with steps on both sides of the feeder for maintenance control and periodic washing of the tank
  • The top ring prevents from overloading the feed
  • The two component painting
  • Paint landing, granaries tray: red color RAL3000
  • Painting chassis, Hopper: color green RAL6010
  • Wedges under the salming wheels
  • PTO for attachment to the tractor

Optional equipment

  • Spare wheel

 

 

Mixer Feeders PRONAR ASIA VMP10

PRONAR ASIA VMP10

PRONAR ASIA VMP10

 

Cattle-feeder PRONAR ASIA VMP-10 is designed to work in both large and small farms. When using cattle-feeders we are able to prepare complete feed, including different components that affects the increase in daily milk yield.

Cattle-feeder PRONAR ASIA VMP-10 hasrdurable and stable construction.Tank sheatingis made of steel plate 8 mm thick, a floor is 20 m thick.Mixing auger in cattle-feeder PRONAR ASIA VMP-10 has nine blades (with the possibility of installation in three positions).On both sides of the tank there are two diagonal underknifes with mechanic control , from sides proportioning hatches with hydraulic opening for feed distribution.

Cattle-feeder PRONAR ASIA VMP-10 is equipped with a 4-point weighing system with LCD display. Weighing facilitates the preparation and dosage of food.Drive feeder ishandled by tractor PTO, capacity requirement is approx. 45 kW.

For servicing one can use the feeder front loader PRONAR, roll carriers of silo cutters by the production of PRONAR width of 1.25 or 1.5 m.

FEEDER PRONAR ASIA VMP10
Allowable total weight 7700 kg
Load capacity 4000 kg
Dead weight 3700 kg
Tankcapacity 10 m3
The loading surface of tank 7.1 m2
The maximum length of the tank 3530 mm
The maximum width of the tank 2490 mm
Tankheight 1588 mmv
The diameter of the silo floor 1960 mm
Dimensions (length/width/height) 4860/2550/2670 mm
Sheet thickness of thefloor/walls of the tank/extension walls 20/8/8 mm
The height of the tank floor from the ground 820 mm
The distance between the wheels 1700 mm
Suspension tough
Applied forceon the drawbar loop 1300 kg
Tires 30 × 11.5-14.5 RE
Structurally permissible maximum speed 25 km/h
Weight System 4-tochechnaya
Feeding systems side unloading with windows
Number of the auger turns the PTO speed is 540 RPM About 25 RPM
Min. tractor capacity requirements 60 / 44.1 hp. ./ KW

Basic equipment

  • Rectangular mainframe made of closed sections
  • Drawbar: fixed to connect with the top or bottom – tractor hitch
  • Drawbar draft: rotational with a loop diameter of 5
  • Drawbar stand: telescopic simple
  • Single-wire pneumatic brake system with manual control of braking force
  • The parking brake with the crank
  • Electric lighting
  • Mixing machine type: 1 vertical auger
  • There are replacement blades for vertical augers: 3 knifes made of chrome – vanadium – tungsten steel reinforced for abrasion near the floor, 7 upper knifes made of chrome – vanadium – tungsten steel reinforced for abrasion
  • The ability to install the blades at three positions.There are 2 opposing blades in a tank increase the speed of the feed grinding process
  • Hydraulically adjustable 2 side unloading windows
  • Two granary tray below unloading windows for a thorough dosage of the feed .The granary trays do not affect the size of the cattle-feeder
  • Two side rubbers of unloading windows limit distribution of feed and enable the uniform feed distribution
  • Electronic scales with LCD display for determining the auger working time and weighing the feed
  • Footboard with steps on both sides of the feeder for maintenance control and periodic washing of the tank
  • The top ring prevents from overloading the feed
  • The two component painting
  • Landing painting , granary tray:RAL3000 color – red
  • Painting of racking, tank: RAL6010 color – green

Optional equipment

  • Drawbar: fixed to connect with the top tractor hitch
  • Drawbar draft: tight with a loop diameter of 40
  • The two-wire pneumatic brake system with manual control of braking force
  • Hydraulic Brakes
  • Potencial for increasing tank cargo capacity for 2 mi (up to 12 mi of 3 total cargo) by installing additional extensions 250 mm high
  • Potencial for reducing tank cargo capacity for 2 mi (up to 8 mi of total cargo) by removing additional extensions 250 mm high
  • Power take-off PTO for connection to the tractor
  • Electronic scales with LCD display of a smaller size than the standard for mounting inside the tractor
  • Programmable indicator integrated with computer programs for feed distribution control able to broadcast data
  • Wedges under the salming wheels
  • Spare wheel
  • Tank capacity with extension of 250 mm
  • The height inside of the tank without extensions

 


 

Rotary rakes PRONAR ASIA ZKP800

PRONAR ASIA  ZKP800

PRONAR ASIA ZKP800

 

Double-rotor rotary rakes PRONAR ASIA ZKP800
Working width min./max. [m] 7,0/8,0
Rotor diameter [m] 3,1
Dimensions in working position (Width min./max. | Length | Height) [m] 7,50/8,50 | 5,40 | 1,45
Dimensions in transportation position (Width | Length | Height (with pulled out fingers/with folded fingers) [m] 2,80 | 5,40 | 4,20/3,55
Type of mounting attachment cat. I and II
Number of rotors 2
Number of working arms on one rotor 11
Number of working fingers on one arm 4
Rotor wheels Pneumatic tandem axle, front torsion wheels 16×6,50-8
Drawbar torsion wheels Pneumatic 10,0/75-15,3
PTO revolutions [RPM] 540
Power requirement [HP] 80
Required tractor hydraulic equipment 1 double block valve + 1 double block valve with a neutral (floating) position